VT-CC2530-Z1 is based on RF Transceiver CC2530 of TI Chipcon, it’s a small size and ultra low power UHF wireless module. CC2530 is a true system-on-chip (SoC) solution for IEEE 802.15.4, ZigBee and RF4CE applications. It combines RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM and many other powerful features. Customer can use it conveniently and reducing your development time.

Features
Radio and Power
· 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver
· Excellent receiver sensitivity and robustness to
· Interference, receiver sensitivity reach to -97dBm
· Programmable output power up to 4.5dBm
· Suitable for systems targeting compliance with worldwide
  radio-frequency : ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
  FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
· Accurate digital RSSI/LQI support
· Data rate: 250kBaud
· Modulation: O-QPSK
· Integrated PCB antenna, other antenna are optional with an IPX connector
· Active-Mode RX (CPU Idle): 24 mA
· Active Mode TX at 1 dBm (CPU Idle): 29 mA
· Power Mode 1 (4 uS Wake-Up): 0.2 mA
· Power Mode 2 (Sleep Timer Running): 1 uA
· Power Mode 3 (External Interrupts): 0.4 uA
· Wide Supply-Voltage Range (2 V–3.6 V)8051 MCU and Peripherals

· Powerful five-channel DMA 
· 128KB in-system programmable flash, customization 32-,64-,256-KB 
· 8KB RAM with retention in all power modes
· CSMA/CA hardware support
· AES security coprocessor
· Battery monitor and temperature sensor
· 12-Bit ADC with eight channels and configurable resolution
· Two powerful USARTs with support for several serial protocols
· IEEE 802.15.4 MAC timer, general-purpose timers (One 16-Bit, Two 8-Bit)
· 32-kHz sleep timer with capture
· Watchdog timer
· 21 general-purpose I/O pins (19× 4 mA, 2×20 mA)
· Hardware debug support

Applications
· 2.4-GHz IEEE 802.15.4 Systems
· RF4CE Remote Control Systems (64-KB Flash and Higher)
· ZigBee Systems (256-KB Flash)
· Home/Building Automation
· Lighting Systems
· Industrial Control and Monitoring
· Low-Power Wireless Sensor Networks
· Consumer Electronics
· Health Care

General Characteristics

Test operating conditions：Ta=25°C，VCC=3.3V if nothing else stated.

Note：
1． The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the distance, and the lower the receiving sensitivity.
2． The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the voltage, the lower the TX power.
3． The module central frequency will change as the operating temperature change, use it under suggest temperature, the module can work well.
4． The antenna will strongly affect the communication distance, please select matched antenna and connect it correctly.
5． The module mount will affect the communication distance.