low cost wireless module-Vchip Microsystem Inc._

Home > Products > Accessories & Components > Electric Parts >Other Electric Parts

low cost wireless module

MOQ ：5 piece

Lead Time ：15 Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : T/T

Departure Port : shenzhen

Product details

Supply Ability

Supply Ability：100000 piecesWarranty(Year)：2 Year

Packaging & Delivery

Length：33 cmWidth：23 cm
Height：5 cm
Packaging：240 piece

Product Specifications

Product Description

General Description

VT-CC110L-433MS is based on RF Transceiver CC110L of TI Chipcon, it’s a small size and ultra low power UHF wireless module. CC110L is a low cost true single chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, The MAX RF output power can be set as high as +10dBm, with data rate as high as 600Kbps. The module integrated many RF functions thus you can use it conveniently and reducing your development time.

Features
· 433MHz transceiver, frequency at bands 387~464MHz can be customized
· Programmable baseband modulator with 2-FSK/4-FSK/GFSK/OOK
· Programmable output power from -20 to +10dBm
· High receiver sensitivity down to -116dBm(at 0.6Kbps data rate)
· Programmable data rate 0.6～600kbps
· Low current consumption with DC 1.8~3.6V supply voltage
· Point to point, point to multipoint communication
· Support carrier sense and digital RSSI output.
· Get higher performance RF system when operation with MCU
· High stability and reliability up to industrial standards
· SPI interface
· Small dimension: 15.2mm×11.8mm×2.2 mm

Applications
· Logistics Tracking System, Warehouse patrol, Electronic label.
· Replace RS232 and RS485 in data transmission
· Industrial monitoring and control in data acquisition
· AMR – Automatic Meter Reading
· Home and building automation
· Consumer Electronics products of wireless control
· Wireless alarm and security systems
· Wireless sensor networks

General Characteristics

Test operating conditions：Ta=25°C，VCC=3.3V if nothing else stated.

Parameter	Type	Condition/Note
Operating supply voltage	DC 1.8～3.6V
Central frequency	433MHz	Can be programmable to other frequency in bands 387~464MHz
Frequency accuracy	±10KHz
Modulation format	2-FSK/4-FSK/GFSK/OOK	Programmable
Transmit power	-30～+10dBm	Programmable
TX current consumption	≤30mA	Po=10dBm
Receiver sensitivity	-110dBm	0.6Kbps
RX current consumption	≤20mA	0.6Kbps
Sleep State current consumption	<1uA	Refer to IC operation states
Data rate	0.6～600kBaud	Programmable
Communication distance	>200m	2-FSK modulation, 10kBaud data rata, +10dBm output power.
Antenna impedance	50ohm
Operating temperature	-20～+75 °C
Storage temperature range	-50～+125°C
Dimension	15.2mm×11.8 mm×2.2mm	See more in PCB description

Note:
1． The module transmission data rate will affect Transmission distance ,the higher the data rate , the closer the distance, and the lower the receiving sensitivity.
2． The supply voltage to the module will affect TX power, in the operating supply voltage range, the lower the voltage, the lower the TX power.
3． The module central frequency will change as the operating temperature change, use it under suggest temperature, the module can work well.
4． The antenna will strongly affect the communication distance, please select matched antenna and connect it correctly.
5． The module mount will affect the communication distance.